// Service 03 — Communications & Content
Words that know the work.
Oil and gas communications and content writing for Canadian energy companies. Website copy, service pages, capability statements, safety and culture content, and careers material — grounded in what your company actually does.
01 / The problem
Most oilfield copy fails in one of two directions.
Either it's so vague it could belong to any company in the province, or it's so dense that the only person who can follow it is someone who already knows the answer. Both lose the same reader: the one deciding whether you're worth a phone call.
Failure one
Adjectives instead of facts
"Safety-focused, customer-driven, committed to excellence." Every competitor says it, none of it is checkable, and a procurement contact skims straight past looking for the number that isn't there.
Failure two
A wall of jargon
Copy pasted from a spec sheet, aimed at an engineer, landing on a general manager or an owner's spouse who does the books. Technical credibility is essential; requiring a decoder ring is not.
Failure three
Written by whoever had time
Half the site written by the founder in 2016, half by an agency who never saw a lease, and a service page added last spring by someone in the office. Three voices, none of them the company's.
Failure four
Nothing a buyer can act on
Pages that describe the service but never say what's included, what regions it covers, what it needs from the client, or what happens after they enquire. Interest with nowhere to go.
02 / What we write
Everything that goes out under your name.
Service page copy
One page per line of work, detailed enough that a buyer who knows exactly what they need can confirm you do it — and clear enough that one who doesn't can still tell whether to call.
Safety and culture pages
Your record, your programs, your certifications and what you actually do on a site, written so it reads as a working practice rather than a compliance obligation. Often the highest-value page on the site.
About and company story
Who started it, why, and what the company is actually good at. In a referral industry this page gets read far more than most owners expect, and generic filler here is a wasted opportunity.
Capability statements & proposals
The document that goes to a prospect after the call, and the boilerplate sections of your bids. Same facts, better ordered, in the same voice as the site so nothing feels borrowed.
Careers content
Job postings and a careers page that give a hand a real reason to pick you — schedule, equipment, crews, how you handle safety. Recruiting is a communications problem long before it's a pay problem.
Ongoing articles & updates
New certifications, new equipment, project notes, regulatory changes explained plainly. Enough movement that a site visited twice in a year doesn't look abandoned the second time.
Two people read the same service page, and they are not looking for the same thing.
The operations lead wants the spec. Procurement wants the reassurance.
03 / How the detail gets in
We ask the person who does the work.
There's no way to write credibly about well testing or reclamation from a website brief. The specifics that make a page convincing only exist in someone's head, and getting them out is most of the job.
-
Step 01
Interviews
Thirty to forty-five minutes per service line with whoever actually runs it. Recorded, so nobody has to take notes and nothing gets softened in the retelling.
-
Step 02
Source material
Spec sheets, safety manuals, old proposals, equipment lists, field photos. Most of what a page needs already exists somewhere in your files, just not in a form anyone would read.
-
Step 03
Draft and challenge
First drafts come back with questions attached — the gaps where a claim needs a number, or where two people described the same service differently. That list is often more useful than the draft.
-
Step 04
Technical review
Every page goes back to the person who was interviewed before it goes live. If they wouldn't say it on a lease, it doesn't ship — that check catches more than any amount of editing.
04 / What to run it with
Good writing on a broken structure still loses.
With a build
If everything you offer lives on one page, no rewrite fixes it — the page count is the problem. Copy written alongside a new structure is where this service does its best work.
Website designOn its own
Common, and perfectly sensible. A site built two years ago that works fine structurally but reads like a brochure is a copy problem, and fixing only that is the cheaper, faster call.
Talk it through05 / Questions
Mostly about your time.
How much of our time does this take?
Roughly one interview per service line, thirty to forty-five minutes each, with the person who actually runs that work — not whoever has the most free calendar. That's where the detail comes from, and there's no substitute for it. After that it's a review pass on each draft. Most companies spend three to five hours total across a full site.
Do you write for search?
Everything is written to be found — clear headings, plain language, the words your buyers actually use, and proper structure underneath. What we don't do is write for a keyword density target, because a page stuffed to rank tends to read as untrustworthy to the human who lands on it, and that human is the one who decides whether to call. If you want a dedicated search campaign on top, that's available separately.
Can you work with copy we already have?
Yes. Editing existing material is cheaper than writing from scratch, and where the technical detail is already right it's the obvious choice. The honest caveat: if the current copy describes five service lines in one paragraph, editing it can't create the detail that was never there. That's a rewrite wearing an edit's clothing, and we'll say so rather than bill you twice.
Will it still sound like us?
That's the point. The interviews exist as much to capture how your people describe the work as to learn what the work is — the phrasing a crew lead uses is usually better than anything an agency would invent. What changes is structure, clarity and what gets said first. If a draft reads like a stranger wrote it, that's a failed draft, and it goes back.
06 / From the blog
More on content and comms.
Communications & Content · · 9 min
A Procurement-Ready Case Study Template for Oil & Gas Companies
A practical case study template for oil and gas vendors: what procurement wants to verify, how to structure proof, and how to publish it without creating risk.
Read
Communications & Content · · 10 min
Publishing Pricing and Rate Information Procurement Can Trust
A practical guide for oil and gas vendors on publishing day rates, rental fees, and unit pricing in a way procurement can actually use.
Read
Communications & Content · · 7 min
Service Page Template for Procurement: A Practical Checklist for Oil & Gas Vendors
A ready-to-use service page template for oil and gas vendors: publish scope, safety proof, downloads, schema, and inquiry details procurement can verify fast.
Read
Communications & Content · · 4 min
Writing Technical Oil & Gas Content That Doesn’t Read Like a Manual
Technical content usually fails in one of two directions — stripped of substance, or written like an equipment manual.
Read
Communications & Content · · 4 min
How Much Jargon Is Too Much on an Oilfield Company Website
Used precisely, industry terminology signals expertise. Used loosely, it quietly does the opposite.
Read
Communications & Content · · 4 min
Writing Service Pages That Speak to Procurement
Most oilfield service pages are written crew-to-crew. The contact evaluating them is asking something else.
Read// Ready when you are
Send us one service page and we'll be specific.
Bring the page you like least. We'll tell you on the call what's missing and whether it's an edit or a rewrite.